Nationwide ยท Since 1983
We scan every roof you own, tell you the years remaining and the condition of the deck underneath, then do the work. We hire, insure and dispatch our own crews.
Every roof scanned on a schedule, not when it leaks.
Trapped moisture and a failing deck, found years early.
Repairs done by us, on the same record.
A score and a year for every roof, so the money is set aside.
Who we work with
Six kinds of owners bring us their roofs, and each one gets the same scan, the same score and the same crews.
Portfolio and multi-building owners
Each roof in the portfolio gets a robotic roof scan, a roof condition score and a remaining service life, measured the same way. Our own crews then do the work, so the record stays in one place.
Roof management for portfolios
Property and facility managers
Tenants call you, and you call one contractor. We scan, repair and keep the record, so ownership sees the condition of every roof without you chasing three vendors.
Roof management for property managers
One building
A single roof gets the same robotic roof scan, condition score and remaining service life as a large portfolio. The repairs are done by our own crews, not handed off to someone else.
Roofing for owners of one building
Schools and public agencies
Districts, colleges, cities and counties get a condition score and a remaining service life for every roof. Those numbers roll into a multi-year plan a board can approve.
Roofing for schools and public agencies
Insurance and claims
After a storm or a leak, we document the roof for your adjuster and then make the repairs. Between events, a scan and a maintenance record show your carrier a roof that is cared for.
Insurance and claims support
Solar
An array often outlasts the roof underneath, and pulling panels to reroof is expensive. A scan first tells you whether to repair, restore or replace before the install.
Roof checks before solarWhy owners move
Owners move to us for four reasons, and every one of them comes down to one contractor carrying the whole roof.
One phone call
One contact. One contractor. One phone call.
Our own crews
We hire, insure and dispatch our own crews.
A number, not a guess
Roof condition score, remaining service life and deck life for every roof.
20,000+
Over 20,000 roofs since 1983.
One way of doing it
Four steps run on every roof we take on, from the first request to the decision about what to do next.
Send the address and the approximate square footage.
A robotic roof scan covers the whole roof with no core cuts.
Scan data becomes a condition score, remaining service life and deck life, signed by a licensed Professional Engineer.
Repair, maintain, restore, replace or wait, with the numbers in front of you.
The technology
An AI-assisted scan reads what is underneath the membrane: water trapped in the insulation, a saturated deck, and seams failing from below. None of it is visible to someone standing on the roof.
A roof inspection is a person looking at a surface. That surface is the only thing anyone can see from up there, and it is usually the last part of the assembly to fail. The water quietly destroying your insulation sits between the membrane and the deck, invisible from above and invisible from below, until the day it reaches a ceiling tile. By then the insulation is gone and the deck is the next thing you pay for.
Our scan reads straight through the assembly, the way an X-ray reads through skin. It maps every wet area, scores the condition of the roof, and tells you how many years of service life are left. Nothing is cut, cored or punctured to get that answer.
Coverage
Commercial Roof Asset Management by Dura-Foam covers flat and low-slope commercial roofs nationwide from Woodland Hills, California. One contact. One contractor. One phone call.
Nationwide
Coverage
Since 1983
In business
20,000+
Roofs
435836
California License
Before you sign
Seven questions come up before almost every signature, and each answer below starts with the fact.
Our own crews do the work on your roofs, start to finish. We hire, insure and dispatch our own crews, so the people who scanned the roof are on the same team as the people who repair it.
A maintenance program costs $0.12 to $0.15 per square foot per year on Monitor with a $1,500 annual minimum, $0.22 to $0.25 on Protect with a $2,500 annual minimum, and $0.40 to $0.45 on Manage with a $4,500 annual minimum. Those three programs are the only prices we publish.
Yes, you can start with one robotic roof scan and no program. The scan is quoted from roof square footage and property count, and the report stands on its own whether or not you sign up afterward.
No, the report is not a pitch for a new roof. Each report is signed and stamped by a licensed Professional Engineer and gives a roof condition score, remaining service life and deck life, so every recommendation rests on measured numbers you can check.
No, the scan will not damage your roof. The robotic roof scan is non-destructive, with no core cuts, no test squares and no new holes in the membrane.
Yes, we cover buildings outside California. Coverage is nationwide, so a portfolio spread across several states still has one contractor and one record.
You call us when something goes wrong, at (310) 647-7192. One contact. One contractor. One phone call.
Find out what every roof you own actually needs.
Request a Roof Scan