About
About Commercial Roof Asset Management by Dura-Foam
Trusted since 1983 on over 20,000 commercial roofs, under California License 435836.
We scan, score and maintain flat and low-slope commercial roofs so owners can plan instead of react.
Office, phone and license
Commercial Roof Asset Management by Dura-Foam
- 22704 Ventura Blvd. Ste. 181, Woodland Hills, CA 91364
- (310) 647-7192
- California License 435836
Who is Commercial Roof Asset Management by Dura-Foam?
Commercial Roof Asset Management by Dura-Foam is the roof scanning and asset management practice of Dura-Foam, a California roofing contractor working since 1983 under License 435836.
Over 43 years the work has covered more than 20,000 commercial roofs: warehouses, shopping centers, schools, plants, offices and public buildings. The practice brings that field experience together with our AI-assisted scan, so the people who read your roof data are the same kind of people who have repaired, restored and replaced commercial roofs for decades.
Why we scan a roof instead of walking it
For 43 years we inspected roofs the way everyone does: a trained person walks the roof and writes down what they see. It is honest work and it finds real problems. It also misses the one thing that decides whether a roof can be saved, because trapped water does not show on the surface until the damage is already paid for.
So we changed the instrument. Our scan combines radar, laser and thermal imaging in a single pass that reads the whole assembly, membrane to deck, and turns millions of readings into one picture of your roof. It is the same category of technology insurers and warranty underwriters now use to rate buildings, which is why the report holds up when you hand it to either one.
What has not changed is who reads it. A licensed Professional Engineer signs every report, and the crew that fixes what we find has been doing this since 1983.
What services do we provide on commercial roofs?
We provide 4 connected services: non-destructive roof scans, ongoing maintenance programs, repair and restoration, and replacement planning across multi-building portfolios.
- Roof scans with a Moisture Map, Deficiency Map, Roof Condition Score and Estimated Remaining Service Life.
- Maintenance programs that keep each roof on a documented schedule.
- Repair, restoration, coating and spray foam, including systems Dura-Foam has applied since 1983.
- Roof asset management: ranking every roof in a portfolio by condition and years remaining.
The full sequence from request to report is laid out on how it works.
How does our approach differ from a traditional roofing contractor?
Our approach differs in 1 fundamental way: every recommendation starts from measured data on the whole roof assembly, not from what can be seen while walking the surface.
| Question | Traditional visit | Our approach |
|---|---|---|
| How is the roof assessed? | Visual walk of the surface | AI-assisted scan of membrane, insulation and deck |
| How is moisture found? | Stains, soft spots or core cuts | Mapped across the whole roof, no cuts |
| What do you receive? | A proposal | A PE-stamped report with scores and maps |
| How is the next step chosen? | Often by the contractor | By you, with remaining service life in hand |
| Can the findings be tracked over time? | Rarely | Yes, on the same roof plan |
How do we score the condition of a roof?
We score every roof from 0 to 100 and place it in 1 of 5 bands, from Excellent at 86 to 100 down to Critical at 0 to 40, each tied to a recommended action.
Our scoring scale, used in every report.
Which roofs and buildings do we work on?
We work on flat and low-slope commercial roofs only, across at least 6 building types: warehouses, retail centers, schools, plants, medical and office buildings, and public facilities.
Common systems include TPO, EPDM, PVC, modified bitumen, built-up roofs and spray polyurethane foam. Sloped roofs are outside our scope. The scan, the scoring and the maintenance programs are all designed around commercial assemblies with insulation over a structural deck, which is where trapped moisture does the most expensive damage.
Where in California do we work?
We work across 19 California counties in Southern California, the Central Coast and the Central Valley, including Los Angeles County and its cities.
Coverage runs from San Diego and Orange counties north through Ventura, Santa Barbara and San Luis Obispo, and inland through Kern, Fresno and the rest of the Central Valley. Large portfolios spread across several counties can be scanned on a coordinated schedule and reported in a single format, so every building is scored on the same scale. The full list of counties and cities is on our service areas page.
Who signs our reports and what does the stamp mean?
A licensed Professional Engineer signs and stamps 100 percent of our reports, which means a licensed professional has reviewed the data and stands behind the findings.
The stamp is why the report carries weight with insurers, lenders, warranty holders and public agencies. It also keeps the assessment separate from any sales conversation: the findings come first, and you decide what to do with them. You can see how the findings are presented on the sample report page.
FAQs
How long has Dura-Foam been in business?
Since 1983, 43 years.
How many roofs have you worked on?
Over 20,000 commercial roofs since 1983.
What is your contractor license number?
California License 435836.
Do you work on sloped roofs?
No. We work on flat and low-slope commercial roofs only.
Are your reports stamped by an engineer?
Yes. A licensed Professional Engineer signs and stamps every report.
Do you also do the repairs?
Yes, and you are free to use the report with any contractor you choose.
Does the scan damage the roof?
No. Nothing is cut, cored or punctured.
How fast is the report?
Within 48 hours of the scan.
Do you install spray foam roofing?
Yes. Dura-Foam has applied spray polyurethane foam since 1983.
Do you manage portfolios of many buildings?
Yes. Every roof is scored and ranked so you know which to fund first.
Is your scan the same kind of technology insurers use?
It is the same category of technology insurers and warranty underwriters now use to rate buildings, which is why the report holds up with either one.
Do you guarantee insurance or warranty outcomes?
No. The report documents the condition of the roof. Coverage, eligibility and renewal decisions belong to your insurer or warranty holder.
How do I contact you?
Request a roof scan or call (310) 647-7192.
Put 43 years of roofing and a PE-stamped scan to work on your roof.
Trusted since 1983 on over 20,000 commercial roofs. California License 435836.