Skip to content
Commercial Roof Asset Managementby Dura-Foam
CallRequest a Roof Scan

Los Angeles County

Commercial Roof Inspection and Maintenance in Chatsworth, CA

Chatsworth is a City of Los Angeles community in the northwest San Fernando Valley with a large industrial and technology district along Nordhoff Street, Prairie Street and the Metrolink line.

Light industrial building roof in Chatsworth, California, inspected by Commercial Roof Asset Management by Dura-Foam

What kinds of commercial buildings are in Chatsworth?

Chatsworth's commercial buildings include technology and manufacturing plants, medical device makers, distribution buildings and business parks concentrated in the industrial district between Nordhoff Street and Lassen Street.

Much of the stock is 1970s through 1990s tilt-up.

  • Nordhoff Street and Prairie Street industrial district: technology and manufacturing plants
  • Lassen Street and Mason Avenue: business parks and flex buildings
  • Chatsworth Metrolink station area: light industrial and office buildings
Roof systems on Chatsworth commercial buildings, compared
Building typeCommon roof systemTypical ageWhat Chatsworth does to it
Technology and manufacturingBuilt-up roof or TPO20 to 45 years oldHeat cracking
Business parksModified bitumen or TPO15 to 35 years oldTenant HVAC curbs
DistributionWhite TPO5 to 25 years oldWind uplift

What does the Chatsworth climate do to a flat roof?

The Chatsworth climate is hot in summer, with northwest Valley temperatures frequently above 100 degrees, and it is exposed to Santa Ana winds and wildfire smoke from the Santa Susana Mountains.

Heat and UV age surfacing, and wind lifts perimeter flashing.

How often should a Chatsworth commercial roof be inspected?

A Chatsworth commercial roof should be inspected twice a year, spring and fall, and after wind events or nearby fires.

Business parks with frequent tenant changes need a check after each new equipment install. Our commercial roof inspection page explains what each visit covers.

What does a maintenance program cost in Chatsworth?

A maintenance program for a 100,000 square foot technology and manufacturing building in Chatsworth costs $22,000 to $25,000 a year on our Protect program, priced at $0.22 to $0.25 per square foot with a $2,500 minimum.

Protect fits most Chatsworth technology and industrial roofs because heat, wind and tenant changes keep repairs in demand. Every tier and what it includes is on the maintenance programs and pricing page.

Annual program cost for a 100,000 square foot technology and manufacturing building in Chatsworth
Monitor$12,000 to $15,000
Protect$22,000 to $25,000
Manage$40,000 to $45,000

Calculated from our published rates: Monitor $0.12 to $0.15 per square foot a year with a $1,500 annual minimum, Protect $0.22 to $0.25 per square foot a year with a $2,500 annual minimum, Manage $0.40 to $0.45 per square foot a year with a $4,500 annual minimum.

How soon can you scan a roof in Chatsworth?

We can scan a roof in Chatsworth as soon as roof access is confirmed after your request, and a 100,000 square foot technology and manufacturing building takes about 2 hours at roughly 50,000 square feet an hour, with the PE-stamped report delivered within 48 hours.

Chatsworth business parks usually have easy truck access, which keeps scan setup short. Send the Chatsworth address through our roof scan request form, or see coverage across Los Angeles County.

What else do Chatsworth property owners ask about roof inspection?

Do you inspect technology plant roofs in Chatsworth?

We inspect technology and manufacturing plant roofs in the Chatsworth industrial district and map every penetration.

Does wildfire smoke affect Chatsworth roofs?

Wildfire smoke and ash affect Chatsworth roofs by loading drains and settling in seams, so we clear drains after nearby fires.

Which parts of Chatsworth do you cover?

We cover every flat and low-slope commercial roof in Chatsworth, including Nordhoff Street and Prairie Street industrial district, Lassen Street and Mason Avenue and Chatsworth Metrolink station area.

How long does a roof scan take on a technology and manufacturing building in Chatsworth?

A roof scan on a 100,000 square foot technology and manufacturing building in Chatsworth takes about 2 hours, because our robotic scan covers roughly 50,000 square feet an hour, and the PE-stamped report follows within 48 hours.

What is the most common commercial roof system in Chatsworth?

Built-up roof or TPO is the most common roof on Chatsworth's technology and manufacturing stock, and those roofs are typically 20 to 45 years old.

Who issues reroof permits in Chatsworth?

Reroof permits in Chatsworth are issued by the Los Angeles Department of Building and Safety, because Chatsworth is part of the City of Los Angeles. Parts of Chatsworth near the Santa Susana Mountains fall in fire hazard zones where fire-rated roof assemblies apply on reroofs.

Schedule a non-destructive roof scan in Chatsworth.

Trusted since 1983 on over 20,000 commercial roofs. California License 435836.