Los Angeles County
Commercial Roof Inspection and Maintenance in Santa Fe Springs, CA
Santa Fe Springs grew up on an oil field discovered in 1921 and is now one of the largest industrial cities in southeast Los Angeles County, with plants, warehouses and trucking yards between the I-5 and I-605.
What kinds of commercial buildings are in Santa Fe Springs?
Santa Fe Springs' commercial buildings are primarily manufacturing plants, chemical and petroleum-related facilities, warehouses and truck terminals.
Much of the stock was built from the 1950s through the 1980s on former oil field land, and the industrial areas along Telegraph Road and Norwalk Boulevard hold hundreds of mid-size plants.
- Telegraph Road and Florence Avenue: mid-size manufacturing plants and machine shops
- Norwalk Boulevard and Carmenita Road: warehouses and trucking near the I-5
- Alondra Boulevard and Valley View Avenue: newer distribution buildings near the I-605
| Building type | Common roof system | Typical age | What Santa Fe Springs does to it |
|---|---|---|---|
| Manufacturing plants | Built-up roof with gravel surface | 30 to 50 years old | Chemical exhaust attacking asphalt near vents |
| Warehouses | Modified bitumen or coated built-up roof | 20 to 40 years old | Ponding where decks have deflected |
| Newer distribution buildings | White TPO | 5 to 20 years old | Airborne residue from nearby processes |
What does the Santa Fe Springs climate do to a flat roof?
The Santa Fe Springs climate combines inland basin heat with airborne residue from plants and heavy truck traffic, which ages flat roofs faster than weather alone.
Process exhaust and oily residue soften asphalt around vents and stacks, and the dry season lets that residue build up until rain washes it into drains.
How often should a Santa Fe Springs commercial roof be inspected?
A Santa Fe Springs commercial roof should be inspected twice a year, spring and fall, plus after any rooftop process change or equipment install.
Plants here add stacks, vents and piping more often than warehouses do, and each new penetration is a new leak point. Our commercial roof inspection page explains what each visit covers.
What does a maintenance program cost in Santa Fe Springs?
A maintenance program for a 150,000 square foot manufacturing plant in Santa Fe Springs costs $33,000 to $37,500 a year on our Protect program, priced at $0.22 to $0.25 per square foot with a $2,500 minimum.
Protect suits most Santa Fe Springs plants because the included light repairs handle the flashing and vent work that process equipment keeps creating. Every tier and what it includes is on the maintenance programs and pricing page.
Calculated from our published rates: Monitor $0.12 to $0.15 per square foot a year with a $1,500 annual minimum, Protect $0.22 to $0.25 per square foot a year with a $2,500 annual minimum, Manage $0.40 to $0.45 per square foot a year with a $4,500 annual minimum.
How soon can you scan a roof in Santa Fe Springs?
We can scan a roof in Santa Fe Springs as soon as roof access is confirmed after your request, and a 150,000 square foot manufacturing plant takes about 3 hours at roughly 50,000 square feet an hour, with the PE-stamped report delivered within 48 hours.
Santa Fe Springs plants often have restricted areas on the roof around process equipment, so we agree on a safe route with your safety officer before we scan. Send the Santa Fe Springs address through our roof scan request form, or see coverage across Los Angeles County.
What else do Santa Fe Springs property owners ask about roof inspection?
Can you scan a roof with chemical exhaust stacks in Santa Fe Springs?
We scan roofs with exhaust stacks in Santa Fe Springs by working around exclusion zones your safety team sets, and the Deficiency Map records residue damage near each stack.
Are Santa Fe Springs plant roofs usually older?
Santa Fe Springs plant roofs are usually older, since much of the city was built out between the 1950s and 1980s, which is why Remaining Service Life numbers matter here.
Which parts of Santa Fe Springs do you cover?
We cover every flat and low-slope commercial roof in Santa Fe Springs, including Telegraph Road and Florence Avenue, Norwalk Boulevard and Carmenita Road and Alondra Boulevard and Valley View Avenue.
How long does a roof scan take on a manufacturing plant in Santa Fe Springs?
A roof scan on a 150,000 square foot manufacturing plant in Santa Fe Springs takes about 3 hours, because our robotic scan covers roughly 50,000 square feet an hour, and the PE-stamped report follows within 48 hours.
What is the most common commercial roof system in Santa Fe Springs?
Built-up roof with gravel surface is the most common roof on Santa Fe Springs's manufacturing plants stock, and those roofs are typically 30 to 50 years old.
Who issues reroof permits in Santa Fe Springs?
Reroof permits in Santa Fe Springs are issued by the City of Santa Fe Springs building department. Some Santa Fe Springs parcels sit on former oil field land with abandoned wells nearby, which matters for ground staging but not for work done on the roof itself.
Schedule a non-destructive roof scan in Santa Fe Springs.
Trusted since 1983 on over 20,000 commercial roofs. California License 435836.